Toyota

Part Number : 33005-AT012
Price : RM11,400

Achieves both purification performance that meets emission standards and improved exhaust efficiency

■Features
Compared to the genuine fine-cell ceramic catalyzer, this product utilizes a low-density metal catalyst.

Part Number : 31029-AT006
Price : RM7,300

A straight structure and there is no restriction
The exhaust pressure is 30% less than that of the stock exhaust system, and Super Turbo Muffler could be meeting about 500 horsepower.

Part Number : 33005-AT011
Price : RM10,800

Achieves both high exhaust purification performance and significant improvement in exhaust efficiency!

Features
Metal catalytic converter has lower exhaust resistance and higher durability by using a low-density metal cell as opposed to the stock ceramic catalyst with a high density cell.

Part Number : 27002-AT002
Price : RM7,600

Monitors and controls transfer case oil temperature during high-load continuous driving to protect the transfer case unit.

Part Number : 13002-AT002
Price : RM3,400

Boost-up specification enhances response and ensures secured piping

■Features
To accommodate higher output, the diameter has been enlarged from the stock diameter of 45 to 50. In addition, the layout has been designed to minimize bending, reducing pressure loss.

Part Number : 13002-AT001
Price : RM2,800

Boost-up specification enhances response and ensures secured piping

■Features
To accommodate higher output, the diameter has been enlarged from the stock diameter of 45 to 50. In addition, the layout has been designed to minimize bending, reducing pressure loss.

Part Number : 15004-AT114
Price : RM5,200

Stable Oil Temperature Control for High-Output and Circuit Driving!
Renewed Design – Compatible with GR Yaris GEN1 / GEN2

■Features
To support the sub-radiator adopted on GEN2 models and DAT-equipped vehicles, the oil line routing has been revised, and a newly designed filter mount has

Part Number : 70026-AT009
Price : RM560

Dry carbon for owners who pursue quality. Make your engine bay gorgeous!

■Features
Lightweight, strong and aesthetically pleasing dry carbon made by autoclave method using Prepreg Carbon Fiber.
Dress-up part to cover the stock fuse box.

TYPE S BODYKIT FRONT BUMPER SPOILER
Part Number : 53004-AT037
Price : RM5,700

TYPE S BODYKIT SIDE SKIRT
Part Number : 53004-AT038
Price : RM4,600

TYPE S BODYKIT REAR BUMPER SPOILER
Part Number : 53004-AT039
Price : RM4,600

TYPE S BODYKIT REAR GT WING (CARBON FIBRE)
Part Number :

Part Number : 42018-AT024
Price : RM3,400

The “Power Editor R” enables greater boost and power gains via a simple plug-and-play installation.

零件编号：70026-AT007
价格：RM570

这是一款兼具性能风格与个性化设计的改装配件。采用斜纹编织碳纤维材质，为引擎舱内部营造更高级、奢华的视觉效果。
这款专用装饰盖安装于原厂保险丝盒上方，并采用与引擎盖相同的斜纹编织碳纤维材质，使引擎舱整体风格更加统一。表面印有 HKS

零件编号 : 70026-AT006 价格 : RM2,280 空气动力学碳纤维引擎盖，为引擎舱营造更丰富、豪华的视觉效果。 这是一款兼具性能与个性化设计的改装配件，可直接替换原厂引擎盖。 采用斜纹编织碳纤维材质，为引擎舱内部带来更高级、奢华的质感。 原厂引擎盖尾部安装的隔音材料可移装至此引擎盖上，以确保维持与原厂相同的隔音效果。 与原厂引擎盖相比，HKS 引擎盖采用有助于减少引擎舱内部气流紊乱的设计。 测试结果证实，在相同车速下，与原厂引擎盖相比，更多新鲜空气能够通过 HKS 引擎盖下方，从引擎舱前端流向后端。 建议将原厂隔音材料移装至 HKS

零件编号： 31014-KT001
价格： RM11,800 备注 请使用原厂执行器（Actuator）。・适用车辆：不带 OPF（汽油颗粒过滤器）的车型。 关于 HKS 排气消音器 1：关于中段排气管
中段排气管的直径是指该管段中直径最大的部分。（不包括消音器及排气尾嘴。）此数据以原厂悬挂系统的状态为准。

2：HKS 排气消音器（包括套件内的所有组件）与路面之间的最小离地间隙。因此，该数值可能与车辆实际离地间隙有所不同。
此数据原则上以原厂悬挂系统的状态为准。不过，部分产品的数据可能采用降低车身弹簧或可调式避震套件的设定，请留意这一点。

注意：挂钩、支架及固定杆可能在不事先通知的情况下更改。

★