Spesifikasi
SKU: RB6090-SB05C
Weight (KG): 6.95
Key Specifications & Design
-
Material & Build: Made from 1.0mm thick titanium throughout with reinforced 8.0mm flanges to prevent warping under high heat.
-
High-Flow Piping: Steps up the main pipe from the factory 54.0mm diameter to 80.5mm all the way through for lower backpressure and sharper throttle response.
-
Single-Exit Layout: Uses a single 115.0mm titanium tip (up from 110.0mm stock), a compact 135.0mm main silencer (down from 152.0mm on Ver.2), and a 118.0mm sub-silencer.
-
Extreme Weight Loss: Weighs 6.95kg versus the 17.4kg factory system on the GT86/BRZ ZN6/ZC6, shedding 10.45kg from the rear of the car.
Important Fitment & Sound Notes
-
GT86 (ZN6) Tip Protrusion: Because RSE redesigned RB6090-SB05C around the second-generation GR86/BRZ rear bumper, bolting it onto a first-generation GT86 (ZN6) makes the tip stick out 10 to 20mm further past the rear valance than it does on a GR86.
-
Sound Levels: With its smaller 135.0mm main canister, it runs slightly louder and sharper than Ver.2—measuring 106dB uncorked at 5,250 rpm on the 2.0L FA20 engine, 101dB with the standard sound reducer, and 97dB with the Ver.2 sound reducer.
-
Bumper Cutout Look: Switching from the stock dual tips to a right-side single exit leaves the left rear bumper cutout open unless you install an exhaust cutout cover.
Choose the Type-80 Ver.3 (RB6090-SB05C) if you want the lightest exhaust RSE makes for the GT86/BRZ or plan to swap it onto a GR86 later; opt for the Type-80 Ver.2 (RB6090-SB05A) if you prefer a flush tip alignment on the ZN6/ZC6 bumper.
Pertanyaan - RSE TYPE 80 (Ver.3) | Subaru BRZ (ZC6)