Bahasa: EN | δΈ­ζ–‡ | BM |

Berkongsi:


RSE TYPE 80 (Ver.2) | Toyota GT86 (ZN6)

RM6,100.00



Spesifikasi

SKU: RB6090-SB05A

Weight (KG): 8.5

The RSE Type-80 Ver.2 Full Titanium Exhaust (part number RB6090-SB05A, often listed by sellers as the "Type R" single-exit variant) is the single-exit racing exhaust system built for the 2012–2021 Toyota GT86/86 (ZN6) and Subaru BRZ (ZC6), with cross-compatibility for the newer GR86 (ZN8) and BRZ (ZD8). It eliminates the dual rear canister layout to deliver maximum weight savings and a straight-through exhaust path.
 

Key Specifications & Design

  • Material & Build: Crafted from 1.0mm thick titanium throughout with reinforced 8.0mm flanges to prevent warping under high heat.

  • High-Flow Piping: Steps up the main pipe from the factory 54.0mm diameter to 80.5mm all the way through for lower backpressure and sharper throttle response.

  • Single-Exit Layout: Uses a single 115.0mm titanium tip (up from 110.0mm stock), one 152.0mm main silencer, and a 118.0mm sub-silencer.

  • Weight Savings: Weighs 8.5kg compared to the 17.4kg factory system on the GT86/BRZ ZN6/ZC6, shedding 8.9kg from the rear of the car.

Important Fitment & Sound Notes

  • Sound Levels: In-house testing at 5,250 rpm on the 2.0L FA20 platform measures 105dB uncorked and 100dB with the included sound reducer installed (with a second Ver.2 reducer included for extra quieting).

  • Bumper Cutout Look: Switching from the stock dual tips to a right-side single exit leaves the left rear bumper cutout open unless you install an exhaust cutout cover.

  • Ver.2 vs. Ver.3 & Type D: Ver.2 (RB6090-SB05A) sits flush with the first-gen GT86/BRZ rear bumper, whereas the newer Type-80 Ver.3 (RB6090-SB05C) drops weight to 6.95kg but sticks out 10–20mm further on the ZN6/ZC6. If you prefer filling both bumper cutouts, the dual-exit Type D (RB6090-SB05B) weighs 10.9kg.

Choose the Type-80 Ver.2 if you want clean, flush bumper alignment on a GT86/BRZ with nearly 9kg of weight savings; opt for the Type D if you prefer a symmetrical dual-tip rear look.



 Pertanyaan - RSE TYPE 80 (Ver.2) | Toyota GT86 (ZN6)