Language: EN | δΈ­ζ–‡ | BM |

Share:


RSE TYPE 80 (Ver.2) | Subaru BRZ (ZD8)

RM6,100.00



Specifications

SKU: RB6090-SB05A

Weight (KG): 8.5

The RSE Type-80 Ver.2 Full Titanium Exhaust (part number RB6090-SB05A—often listed by aftermarket sellers and distributors as the "Type R" single-exit variant) is the earlier single-exit racing exhaust system for the 2022+ Toyota GR86 (ZN8) and Subaru BRZ (ZD8), built originally for the first-generation ZN6/ZC6 chassis with cross-fitment for the second-generation platform. It swaps the bulky factory dual-exit steel setup for a straight-through titanium layout to reduce weight and improve exhaust flow.

Key Specifications & Design

  • Material & Build: Made from 1.0mm thick titanium throughout with reinforced 8.0mm flanges to prevent warping under high heat.

  • High-Flow Piping: Expands the main pipe from the factory 53.5–55.0mm diameter to 80.5mm all the way through for lower backpressure and sharper throttle response.

  • Single-Exit Layout: Uses a single 115.0mm titanium tip (up from 110.0mm stock), one 152.0mm main silencer (larger than the 135.0mm canister on Ver.3), and a 118.0mm sub-silencer.

  • Weight Savings: Weighs 8.5kg versus the 16.0kg factory system on the GR86/BRZ ZN8/ZD8, shedding 7.5kg from the rear of the car.

Important Fitment & Sound Notes

  • GR86 (ZN8) Fitment & Bumper Clearance: While RB6090-SB05A bolts onto the 2022+ GR86/BRZ, its larger 152.0mm main muffler creates tight rear bumper clearance and slightly uneven tip stick-out on the ZN8/ZD8 chassis—which is why RSE later introduced the redesigned Type-80 Ver.3 (RB6090-SB05C, 6.95kg) specifically for the GR86.

  • Sound & Reducers: Because it runs a larger 152.0mm main silencer than Ver.3, it produces a slightly deeper, marginally quieter tone than the newer revision. It ships with removable sound reducers (standard and Ver.2 inserts) along with required gaskets, bolts, nuts, and bolt anti-seize paste.

  • Bumper Cutout Look: Switching from the factory dual tips to a right-side single exit leaves the left rear bumper cutout open unless you fit an exhaust cutout cover.

Choose the Type-80 Ver.2 (RB6090-SB05A) if you specifically want the larger 152.0mm muffler canister or are sourcing a cross-compatible ZN6/ZN8 unit; opt for the Type-80 Ver.3 (RB6090-SB05C) if you want guaranteed zero-interference bumper clearance on a dedicated GR86/BRZ build and an extra 1.55kg of weight savings.



 Inquiry - RSE TYPE 80 (Ver.2) | Subaru BRZ (ZD8)